ARM-USB-TINY-H
[ARM-USB-TINY]

Low cost High Speed ARM USB JTAG suporter by OpenOCD source ARM debugger.

FEATURES

• Debug all ARM microcontrollers supported by OpenOCD
• High speed USB 2.0 with lower lattency time, RTCK adaptive JTAG clock up to 30Mhz and higher throughput achieve x3-x5 times faster programming speed than ARM-USB-TINY, can be used with all ARM devices for programming and debugging.
• Uses ARM's standard 2x10 pin JTAG connector
• supports ARM targets working in voltage range 2.0 – 5.0 V DC
• software supported by OpenOCD (open source) debugger
• comes with CD with Windows installer for full featured and open source tools as alternative to the commercial ARM
  development packages: GCC C compiler, openOCD debugger and Eclipse IDE.
• dimensions 50x40 mm (2x1.6") + 20 cm (8") JTAG cable

DOCUMENTS:

• How to install GCCFG CD which comes with ARM-USB-TINY-H
• ARM-USB-TINY flyer
• Using Open Source Tools for AT91SAM7 Cross Development - Revision B guide by Jim Lynch
• (the old) ARM Cross Development with Eclipse (10MB) REV-3 very detailed tutorial by Jim Lynch how to setup and works with the free GNUARM tools LPC2106 board. The sample codes for this tutorial is here.
• ARM Cross Development with Eclipse in Spanish language (3MB) REV-1 Paul Aguayo did a great job translating to Spanish language Jim Lynch's tutorial. He also shrink the size of the document without missing the quality of the pictures and tutorial text.
• GNU toolchain setup with openOCD by Michael Fischer

HARDWARE:

• ARM JTAG connector (top view)

SOFTWARE:

• Olimex's ARM GCC for Windows Dummies install CD - installs on your computer WinARM + OpenOCD debugger + Eclipse for out of the box development with the open source GNU C compiler and OpenOCD debugger, supports flash loading on LPC and external flash for LPC-H2214, LPC-H2294, with make examples for different ARM controllers. The current revision of the CD is REV.G check the CD content.
• Drivers for working with OpenOCD , Drivers for CrossWorks (FTDI drivers)
• openOCD open source debugger from Dominic Rath for debugging with Insight/GDB.
• Using OpenOCD as Flash programming tool article written by Martin Thomas
• ARM projects with OpenOCD by Martin Thomas
• WinARM - easy to install open source GCC toolchain by Martin Thomas. We are working on CD install package for WinArm+OpenOCD+ARM-USB-OCD support
• CrossWorks - commercial IDE version 1.7 supports all Olimex JTAGs, personal licensees start from US $125(!)
• Building GCC for ARM tutorial
• Building GCC for Cortex tutorial
• Using OpenOCD tutorial
• For the moment the only supported package is GCC C compiler + openOCD debugger + Eclipse IDE. Olimex can provide the necessary information and cooperate with interested parties if they want to add low cost USB debugger support to their C compilers and IDEs.