Gtronica Main
   Portugues English Deutsch Español   ::  Fórum  ::  Contactos  ::      
  Início » Catálogo » Olimex » ARM-USB-OCD Conta  |  Ver carrinho  |  Realizar pedido   
Sobre nós
Como comprar
Perguntas e Respostas
MEGA Desconto !
Nota: Só para clientes particulares em pedidos superiores a 40Eur. Limitado ao stock existente. Promoção até 28-02-2019.




USB JTAG debugger - offers JTAG + RS232 (full modem signals supported) port + power supply all in one compact device

  • Fast speed USB 2.0 JTAG dongle interface, can be used with all ARM devices for programming and debugging.
  • uses ARM's standard 2x10 pin JTAG connector
  • supports ARM targets working in voltage range 2.0 – 5.0 V DC
  • software supported by OpenOCD (open source) debugger
  • adds virtual RS232 port to your computer with all modem signals like: DTR, DSR, DCD, RTS, CTS, Rx, Tx
  • can be used as power supply to your target board with three jumper selectable power supplies: 5V 9V and 12VDC,
    USB source current is limited with resetable fuse at 300mA, at the different output voltage the maximum current is
    different: 5V/200mA, 9V/100mA, 12V/70mA, note that this also depend on your USB host current capabilities, if other
    USB devices are attached to your computer or if the laptop is running on batteries these figures may be different and
    depend on your computer USB host.
  • comes with CD with Windows installer for full featured and open source tools as alternative to the commercial ARM
    development packages: GCC C compiler, openOCD debugger and Eclipse IDE.
  • dimensions 50x40 mm (2x1.6") + 20 cm (8") JTAG cable + 30 cm (12") power supply cable




    • Olimex's ARM GCC for Windows Dummies install CD - installs on your computer WinARM + OpenOCD debugger + Eclipse for out of the box development with the open source GNU C compiler and OpenOCD debugger, supports flash loading on LPC and external flash for LPC-H2214, LPC-H2294, with make examples for different ARM controllers.
    • openOCD open source debugger from Dominic Rath for debugging with Insight/GDB.
    • WinARM - easy to install open source GCC toolchain by Martin Thomas. We are working on CD install package for WinArm+OpenOCD+ARM-USB-OCD support
    • For the moment the only supported package is GCC C compiler + openOCD debugger + Eclipse IDE. Olimex can provide the necessary information and cooperate with interested parties if they want to add low cost USB debugger support to their C compilers and IDEs.
  • Para mais informações visite a página deste produto.
    Produto adicionado ao nosso catálogo Domingo 22 Outubro, 2006.
    Clientes que compraram este produto também compraram
    Arduino Duemilanove c/ Atmega328
    Arduino Duemilanove c/ Atmega328
    Arduino Workshop Kit - Com placa Duemilanove
    Arduino Workshop Kit - Com placa Duemilanove
    RA18H1213G MOSFET 18W
    RA18H1213G MOSFET 18W
    Outros produtos
    Informe um amigo acerca deste produto
    Notificação more
    NotificaçõesAvise-me de alterações a ARM-USB-OCD
    Temos 35 visitantes online.
    Copyright © 2019 Gtronica - Todos os direitos reservados